Fix Error code E000 on Canon Printer – SYSTEM ERROR E000 – Hi, This post will help you fix your Canon Printer Error code E000, you will found some solution to repair your canon printer,this code show as a message on your printer’s LCD screen, you can see

Error code E000 with Canon D1120,Canon mf4320d,Canon image Class D860 printer – SYSTEM ERROR E000

Question 1 from Helena: We have a model Canon printing device, that We put to use it just for several periods only. Canon D1120 printer giving uss an Error with code E000 and It does not print anything at all. We tried to contact Canon Support and also they instructed us to move my canon printer to maintenance store. We shouldn’t spend $100 or maybe more for fix and asking yourself: if any body have recommendation. Please help me, Thank you!

canon error code e000 repair

Solution 3: Check Fixing Film and repair E000 code

+ Canon printer system error E000 is a boot error

Temperature detected by the Main or SubThermistor not increase the value specified on startup.

You can fix this code by:

+ Check Fixing Film cord block.

+ Or Replace Fixing Film blocks.

+ Or Replace the DC controller PCB.

+ or check bar radiator

check fixing film cord block to repair code E000

Solution 2: Reset factory your canon printer:

Your printer show Error code E000 suggests the problem history has recognized all of these of the following error codes four moments: Error code E001;Code E002;Error E003. Printer Canon E000 error will be removed in the service mode.

Please try reset factory your canon printer..but if it still show error code E000 again ,you can try with a genuine fuser unit (reseting fuser unit). Good luck

Solution 3: Try this, atempt will clear canon E000 code in Service mode:


2.Go to #7 Printer and Press OK

3.Go to #4 Printer Reset and Press OK

4.Yes = ( * )

5.Power cycle unit.

Solution 4: Clear Error Code E000 by definitive reset

This solution just work only with canon models: ImageRunner 1200/1300/1310,1330,1370,1630,1670, and Canon PC1060/1061/1080F,Canon ImageClass D620/D660/D661/D680/D681/D880

Please following steps:

+ Press Additional Functions key

+ Press #

+ Press > to #7 Printer Function

+ Press Set

+ Press > to #4 Printer Reset

+ Press Set

+ Press <

And then you Unplug printer and repower it and check error E000, hope it not show again 😀